Thursday, October 27, 2011

How come this look like my own family fridge runs continually?

When working properly, the thermostat turns the compressor on and off. Once the thermostat turns the compressor on, it will run until the temperature inside the refrigerator is lower than the setting of the thermostat.

Make sure that the refrigerator has enough air clearance on all sides. Refrigerators with a condenser coil grid on the back of them need room to radiate the heat away from the coils.

Verify that the door light switch is working properly. Push the switch with your finger to verify the light is turning off. If the light stays on, it will actually warn the interior of the refrigerator. Fix or replace the switch if it is faulty.


Refrigerator Defrost Thermostats
Modern refrigerators that have a lot of storage and large freezer compartments run for longer periods of time. They also start and stop very frequently to maintain an even temperature. This is especially true if you have just put a lot of warm food in the refrigerator, or if it is very hot and humid. It can take several hours to get back to the cool temperature you have it set for after putting a large amount of food in it.

If the compressor is not shutting off when the temperature inside the refrigerator is cold enough, you may have a bad thermostat. You may also have the temperature set too high in the refrigerator. Try adjusting the thermostat to a lower temperature. If this turns the compressor off, you had it set too high. With the help of a refrigerator thermometer, you can find a more ideal setting that will keep your food cold, but not so cold that the compressor is always running. If raising the temperature setting doesn't help, it may be a problem with the thermostat and you will need to replace it.

If your thermostat is working properly, there's a chance that you have low levels of refrigerant in the sealed system. If this is where the symptoms lead you, you need to contact a professional appliance repair person. Only an EPA certified technician can legally work on a sealed system. If you attempt to do work on this system, you will void the warranty.

If this is a new refrigerator, it will run for a long time, almost constantly, before it gets cooled enough to stabilize the interior temperature. Allow up to 24 hours for it to stabilize. The refrigerator should be at least one half to two thirds full. This will help to maintain a stable temperature inside the unit. The cold items inside will help to keep an even temperature inside after the door has been opened and closed. Some people prefer to keep a lot of stuff in the refrigerator as ballast, even jugs of water. This helps to maintain temperatures inside so that when the door gets opened and closed often, it doesn't need to run as much to maintain the temperature inside.

This blog is brought to you by Appliance Repair San Antonio. Attempting to repair appliances without proper training and safety standards is dangerous. Appliances should only be repaired by skilled professionals who have the knowledge and experience to safely bring them out of disrepair. Repairs performed by unqualified people risk serious injury or even death. A relatively small outlet can easily carry the current needed to kill a person. Please call (210)-704-1010 or email info@ApplianceRepairSanAntonio.info. Our technicians are stading by and ready to relieve you from your appliance problems.

Wednesday, October 26, 2011

Exactly Why Is My Own Fridge Not Cooling Properly?

WARNING!
To avoid personal injury or death, disconnect your appliance from its power source before you start any troubleshooting or repair work. Use caution when working inside any appliance.
If the refrigerator isn't cool, check to see if the light comes on when you open the door. Next check to see if the thermostat is set properly. If both of these are OK, then check to see if the compressor is running.


Refrigerator Defrost Thermostat
See if the compressor motor is running. The compressor is in a case with no visible moving parts. It is usually located at the back of the refrigerator near the bottom. If it’s humming, or making a steady noise, and your refrigerator is still not cooling properly, there could be a problem with one or more various components.

Refrigerators have either a mechanical defrost timer, or an ADC (Adaptive Defrost Control). If your refrigerator has a mechanical timer, set the cold control to the coldest setting and then advance the defrost timer. You can manually advance the timer with a screwdriver. Insert the screwdriver into the advancement pinion and turn clockwise a 1/4 to 3/8’s of a turn. If the compressor starts, replace the defrost timer. For further help, you’ll want to call a professional appliance repair technician.


Refrigerator Defrost Timer
Sometimes you can hear a click-buzz-click sound coming from the compressor. This is the relay/overload at work. If you hear this, power is getting to the compressor. If you do, something is wrong with either the compressor or the compressor starting components. If you have a newer model with solid-state starting components, you may not hear anything at all. If there is power to the starting components, you may be able to test each part and replace any bad parts. There is also a 3-in-1 unit that may work on your model which replaces all the components in one unit. If the compressor still won’t start, you have a bad compressor and need to replace it. If it does start, wire the 3-in-1 part in permanently. Make sure the one you buy is rated for the horsepower of your appliance.

If you don’t hear anything, you can take the cover off the side of the compressor and test for voltage at the two leads. If no voltage is present, it’s time to check the cold control. To test if the cold control is bad, you can temporarily jump the two wires at the cold control. If you get power to the compressor after doing so, the cold control needs to be replaced.

This blog is brought to you by Appliance Repair Pittsburgh. Attempting to repair appliances without proper training and safety standards is dangerous. Appliances should only be repaired by skilled professionals who have the knowledge and experience to safely bring them out of disrepair. Repairs performed by unqualified people risk serious injury or even death. A relatively small outlet can easily carry the current needed to kill a person. Please call (412)-489-4423 or email info@ApplianceRepairPittsburghPA.net. Our technicians are stading by and ready to relieve you from your appliance problems.

Tuesday, October 25, 2011

Why is the foodstuff towards the end of the family fridge very cold?

WARNING!
To avoid personal injury or death, disconnect your appliance from its power source before you start any troubleshooting or repair work. Use caution when working inside any appliance.
If the food on bottom is freezing, it may be that you don't have enough food in the refrigerator to transfer heat efficiently. Cold air sinks and warm air rises, so if the refrigerator is not running for very long at a time, the air circulation is not good. Even though it sounds backwards, turn the control to a lower temperature setting. This will make the refrigerator run longer, and will increase the air circulation.

Do not put foods that are easily damaged anywhere near the damper or baffle from the freezer section.

This blog is brought to you by Appliance Repair Phoenix. Attempting to repair appliances without proper training and safety standards is dangerous. Appliances should only be repaired by skilled professionals who have the knowledge and experience to safely bring them out of disrepair. Repairs performed by unqualified people risk serious injury or even death. A relatively small outlet can easily carry the current needed to kill a person. Please call 800-469-4663 or email info@ApplianceRepairPhoenixAZ.net. Our technicians are stading by and ready to relieve you from your appliance problems.

Sunday, October 23, 2011

Why won't my fridge work on almost all?

WARNING!
To avoid personal injury or death, disconnect your appliance from its power source before you start any troubleshooting or repair work. Use caution when working inside any appliance.

The first thing to check if your refrigerator stops working completely is to make sure that there is power to the appliance. To see if there is power to the refrigerator, plug a different electric device that you know works into the same outlet. If there's no power, check your fuse or circuit breaker. After verifying that there’s power to the refrigerator, and it’s still not running, then your problem lies in a different area. You'll want to check the compressor, overload/relay, thermostats, and wiring, or contact a professional appliance repair person.

This blog is brought to you by Salt Lake City Appliance Repair. Attempting to repair appliances without proper training and safety standards is dangerous. Appliances should only be repaired by skilled professionals who have the knowledge and experience to safely bring them out of disrepair. Repairs performed by unqualified people risk serious injury or even death. A relatively small outlet can easily carry the current needed to kill a person. Please call (801)-895-7245 or email info@SaltLakeCityApplianceRepair.net. Our technicians are stading by and ready to relieve you from your appliance problems.

Wednesday, October 19, 2011

GE Product recalls Dishwashers As a result of Fireplace Hazard

WASHINGTON, D.C. – The U.S. Consumer Product Safety Commission, in cooperation with the firm named below, today announced a voluntary recall of the following consumer product. Consumers should stop using recalled products immediately unless otherwise instructed. It is illegal to resell or attempt to resell a recalled consumer product.

Name of Product: GE Profile™ and GE Monogram® Dishwashers
Units: About 174,000
Manufacturer: GE Appliances & Lighting, of Louisville, Ky.
Hazard: Water condensation can drip onto the electronic control board, causing a short circuit and resulting in an overheated connector. This poses a fire hazard to consumers.

Incidents/Injuries: GE has received five reports of fires, four of which caused minor damage to the kitchen countertops where the dishwashers were installed and one caused minor damage to adjacent cabinets and smoke damage to the home. No injuries have been reported.

Description: This recall involves the GE Profile dishwashers manufactured between July 2003 and December 2005 and GE Monogram dishwashers manufactured between January 2004 and December 2006. They were sold in white, black, bisque, stainless steel and with custom panels. The recalled model and serial numbers listed below are located on the inside on the front left side of the dishwasher tubs.

Sold at: Retail stores nationwide, appliance dealers and authorized builder distributors from July 2003 through December 2006 for between $750 and $1,400.
Manufactured in: United States
Remedy: Consumers should immediately stop using the recalled dishwashers, disconnect the electric supply by shutting off the fuse or circuit breaker controlling it and inform all users of the dishwasher about the risk of fire. Contact GE for a free in-home repair or to receive a GE rebate of $200 for the purchase of a new GE Profile dishwasher and a GE rebate of $400 for purchase of a new GE Monogram dishwasher.

This blog is brought to you by Appliance Repair Oklahoma City. Attempting to repair appliances without proper training and safety standards is dangerous. Appliances should only be repaired by skilled professionals who have the knowledge and experience to safely bring them out of disrepair. Repairs performed by unqualified people risk serious injury or even death. A relatively small outlet can easily carry the current needed to kill a person. Please call 800-469-4663 or email info@ApplianceRepairOklahomaCityOK.com. Our technicians are stading by and ready to relieve you from your appliance problems.

Tuesday, October 18, 2011

Cooktop Cleanup Equipment

Now that Thanksgiving is over, this product will do a great job on cleaning your glass cooktop, It comes with everything you need.





This blog is brought to you by Appliance Repair Miami Beach. Attempting to repair appliances without proper training and safety standards is dangerous. Appliances should only be repaired by skilled professionals who have the knowledge and experience to safely bring them out of disrepair. Repairs performed by unqualified people risk serious injury or even death. A relatively small outlet can easily carry the current needed to kill a person. Please call (786)-375-6350 or email info@ApplianceRepairMiamiBeach.com. Our technicians are stading by and ready to relieve you from your appliance problems.


Floor Protection For Touching Appliance

This is a good product I use on a regular basis to protect floors when moving appliances out from the wall.



this blog is brought to you by Appliance Repair Memphis. Attempting to repair appliances without proper training and safety standards is dangerous. Appliances should only be repaired by skilled professionals who have the knowledge and experience to safely bring them out of disrepair. Repairs performed by unqualified people risk serious injury or even death. A relatively small outlet can easily carry the current needed to kill a person. Please call 800-469-4663 or email info@ApplianceRepairMemphisTN.net. Our technicians are stading by and ready to relieve you from your appliance problems.